Pricing · · 9 min read
Scrap Value Gold Per Gram: Calculate It by Karat
Scrap gold value per gram for 10k, 14k, 18k and 24k: the spot-to-gram formula, pennyweight conversions, payout percentages and why e-waste is different.
Key takeaways
- Scrap value gold per gram equals spot price divided by 31.1035, multiplied by the karat purity fraction, then by weight and your payout percentage.
- At an illustrative spot of US$2,600/oz, 14k gold melts for roughly $48.73 per gram and pays $34.11 per gram at a 70% payout.
- One pennyweight equals 1.5552 grams, and mixing dwt with grams is a common source of counter mispricing.
- E-waste gold cannot be priced per gram at the counter because plating yields vary; only a refiner’s assay gives an accurate number.
- Test every piece with acid or XRF before paying, since paying 14k rates on 10k gold means roughly a 40% overpayment.
Scrap value gold per gram equals the live spot price, divided by 31.1035, multiplied by the karat’s purity fraction, then multiplied by weight and your payout percentage. At an illustrative spot of US$2,600/oz, 14k works out to roughly $48.73 per gram at full melt, before your payout layer. This guide walks the full math for 10k, 14k, 18k and 24k, plus how e-waste gold breaks the counter formula.
What is the scrap value of gold per gram?
Scrap value gold per gram is the melt value of a piece: the live spot price multiplied by karat purity, multiplied by weight in grams. It is the ceiling before any payout percentage. A gram of 14k contains 58.3% pure gold, so at a spot price of $2,600 per troy ounce (about $83.59 per gram), its melt value is roughly $48.73.
Melt value vs payout: the two numbers that matter
Melt value is what the metal is worth. Payout is what your store actually pays, and it is always a percentage of melt set by your payout rules. If counter staff quote melt value instead of your payout percentage, you lose margin on every walk-in. IngotOS applies your payout rules automatically at the counter.
How do you calculate gold scrap value per gram step by step?
Converting spot per ounce to spot per gram
Spot prices are quoted per troy ounce, but your scale reads grams. Divide the spot price by 31.1035 to get spot per gram. At $2,600/oz, that is $83.59 per gram of pure gold.
Converting pennyweights to grams
Some older suppliers and trade references quote in pennyweights. One dwt equals 1.5552 g, so multiply pennyweights by 1.5552 before running the calculation. Mixing the two units is one of the most common ways counter staff underpay or overpay on a buy.
Applying a payout percentage
Multiply spot per gram by the karat fraction (10k = 0.417, 14k = 0.583, 18k = 0.750), then apply your payout percentage. A 10.0 g 14k piece with spot at $2,600 works out to $83.59 × 0.583 × 10.0 = $487.34 melt value; at an 80% payout, you pay $389.87.
The formula is simple. The problem is running it identically at every counter, every shift, from live spot. That is where pricing rules inside a system like IngotOS replace mental math and handwritten tickets.
What is the scrap value per gram for 10k, 14k and 18k gold?
The per-gram melt value is spot price per gram multiplied by karat purity, and your payout is that number times your payout percentage. These examples use an illustrative spot of $2,600 per troy ounce (31.1035 g, so $83.59 per gram of fine gold) and a 70% payout:
| Karat | Purity | Melt value / g | Payout / g at 70% |
|---|---|---|---|
| 10k | 41.7% | $34.86 | $24.40 |
| 14k | 58.3% | $48.73 | $34.11 |
| 18k | 75.0% | $62.69 | $43.89 |
| 24k | 99.9% | $83.51 | $58.46 |
10k worked example
10k gold is 10/24 pure, or 41.7%. Multiply $83.59 × 0.417 = $34.86 melt per gram. At a 70% payout you pay $24.40/g, leaving $10.46/g of gross margin before refining fees. Watch 10k closely: it is common in older chains and class rings, and misreading it as 14k overstates melt value by $13.87/g at this spot.
14k worked example
14k is 58.3% pure. $83.59 × 0.583 = $48.73 melt per gram, paying $34.11/g at 70%. If your scale reads in pennyweights, 1 dwt of 14k melts for $75.78 (48.73 × 1.5552), so a 70% payout is $53.05/dwt. Post the dwt figure at the counter too, or staff quoting grams and dwt will drift apart.
18k worked example
18k is 75.0% pure. $83.59 × 0.75 = $62.69 melt per gram, paying $43.89/g at 70%. European stamps (750) map directly to this purity, which speeds verification.
24k and fine gold worked example
24k at 99.9% purity melts for $83.51/g, paying $58.46/g at 70%. Fine gold needs no purity guesswork, so some operators run a higher payout tier on it. Whatever percentages you settle on, encode them once as payout rules against live spot rather than trusting each operator to redo this math for every walk-in.
What is the gold scrap value per ounce vs per gram?
Spot prices are quoted per troy ounce, so the per-ounce calculation is the same math without the conversion. Take 14k gold with spot at $2,600/oz: purity is 0.583, so melt value is $2,600 × 0.583 = $1,515.80 per troy ounce. Divide by 31.1035 and you get $48.73 per gram, matching the per-gram example above.
Troy ounce vs standard ounce: the conversion that trips up new staff
A troy ounce is 31.1035 grams; a standard (avoirdupois) ounce is 28.3495 grams. If a staff member divides by 28.3495, every payout on the books runs about 9.7% high. Scale in grams, quote in either unit, and make the 31.1035 divisor part of your written payout rules so the number never depends on who is at the counter.
How do you find the scrap gold value per gram today?
Live spot comes from commodity markets and updates continuously during trading hours, so the number you quote at 9 a.m. can move several times before lunch. Purity is the fixed half of the math: 10k is 41.7% gold, 14k is 58.3% and 18k is 75%. Spot is the moving half.
Use one spot source for every counter
When each employee checks their own website mid-shift, two clerks can be working from feeds minutes apart, and your payout per gram drifts with whoever refreshed last. Pick one spot source for the whole business and price every buy from it, so every receipt traces back to the same number.
Why two locations quoting different payouts is a variance problem
If Store A pays $2 less per gram than Store B on the same karat, walk-ins will route to the higher payer and your cash on hand swings unpredictably. That gap is variance, and it is invisible unless every location calculates from the same spot source and payout rules. IngotOS prices every location from the same live spot feed and the same payout rules, so a gram of 14k pays the same at every counter.
What is the computer gold scrap value? (E-waste gold)
Where gold sits in computers
Gold concentrates in a few predictable places: CPU pins and lids, RAM contact fingers, connector pins and the edge fingers on expansion cards. Older server-grade CPUs tend to carry heavier gold plating than most consumer parts, and memory sticks from the same era are heavier on fingers than modern boards. Board-level plating is thin, measured in microns, so a pallet of motherboards looks valuable and often isn’t.
Why you can’t price e-waste per gram like karat gold
Karat testing works because jewellery is homogeneous: an XRF reading on a 14k ring tells you the whole ring’s purity, and the scrap value per gram follows directly. E-waste is the opposite. Gold is a plating measured in microns on top of base metal, so a gram of CPU weighs a gram but contains only a few milligrams of gold, and the yield varies by processor family, board type and era.
You cannot test it at the counter the way you test a karat; the only accurate number comes from a refiner who processes the batch, recovers the metal and reports actual yield against an assay. Pricing e-waste per gram by weight or by a guessed purity is how buyers end up holding material worth a fraction of what they paid for it.
When to accept it and when to route it to a refiner
Accept e-waste over the counter only when you can sort it into known categories, price each category against refined recovery rates and hold it until you have enough volume for a refiner lot. If a walk-in brings three CPUs and a bag of RAM, pay against your category sheet or decline politely. If you cannot sort and price it consistently, route it to a refiner and treat it as a drop-off, not a buy.
How do you test karat purity before paying scrap value?
Misgrade a karat and the per-gram math collapses: paying 14k rates on 10k gold means paying for 58.3% purity on metal that is 41.7%, roughly a 40% overpayment before your payout percentage even applies. Test every piece, every time.
Acid vs XRF at the counter
Acid kits are cheap and fast but subjective; results depend on the operator reading the reaction, which is exactly how two staff members end up pricing the same chain differently. Electronic testers improve on acid but still need correct calibration and clean contact points. Counter XRF reads the full alloy composition in seconds and gives you a purity reading you can attach to the transaction record, which matters when your holding period and audit trail depend on documented karat.
Whatever you use, spot-check XRF results against acid on high-value pieces, and log the test method with the weight so shift reconciliation shows how every payout was priced.
How do you keep per-gram pricing consistent across multiple locations?
The formula only protects your margin if every operator applies it the same way. That means one live spot feed, one payout matrix by karat and a POS that enforces both instead of trusting counter staff to do the math on a calculator.
Payout matrices by karat
Set your payout percentage per karat in advance: 10k, 14k, 18k, 22k and 24k each get a fixed percentage of melt value per gram. Staff weigh the item, the system pulls spot, applies the matrix and prints the payout. No employee judgement, and no variance between your Ottawa and Toronto counters on the same afternoon.
Audit trail and shift reconciliation
Every buy should log weight, karat, spot price at transaction time, payout and operator. At close, shift reconciliation compares cash on hand to recorded payouts so variance surfaces the same night, not at month-end. If a payout falls outside your matrix, the audit trail shows who, when and by how much.
Frequently asked questions
How much do gold buyers actually pay per gram compared to melt value?
Payout is a percentage of melt value set by your own rules, commonly in the 70% to 80% range depending on karat and volume. At an illustrative US$2,600/oz spot, 14k melts for $48.73/g and pays $34.11/g at 70%. The exact percentage is a business decision, but it should be fixed in advance, not decided per transaction.
Is 14k gold worth half of 18k gold by weight?
No. 14k is 58.3% pure gold and 18k is 75.0%, so 14k is worth about 78% of 18k, not half. At the illustrative spot of US$2,600/oz, 14k melts for $48.73/g versus $62.69/g for 18k.
How many grams are in a pennyweight and why do some buyers quote dwt?
One pennyweight equals 1.5552 grams. Older suppliers and trade references still quote in dwt, so buyers convert before calculating. At the illustrative spot, 1 dwt of 14k melts for $75.78, so a 70% payout is $53.05/dwt. Post both figures at the counter to keep quotes consistent.
Do I need a licence to buy scrap gold from the public in Canada?
In most Canadian jurisdictions, buying used gold from the public requires a second-hand dealer or precious metals licence, and requirements vary by province and municipality. Many jurisdictions also impose holding periods and reporting or identification obligations on purchases. Check your provincial and municipal rules before opening a buy desk.